E-commerce OMS/WMS · Southeast Asia

E-commerce OMS/WMS: orders from every marketplace, accurate stock, on-time shipping

Orders from every marketplace enter one order pool: stock is reserved first, then the available quantity is synced back to each platform. The warehouse rules come from Flash Fulfillment’s 150,000+ m² of its own warehouses: slots follow sales, pick faces are refilled before each wave is released, and orders close to their cut-off are picked first.

  • Shopee
  • Lazada
  • TikTok Shop
  • Amaze
  • Makro
  • Line Shop
  • Shopify

At a glance

What is Flash OMS/WMS?

Flash OMS/WMS is an order and warehouse management system for e-commerce warehouses in Southeast Asia, covering everything from order capture to shipment. Order capture: orders from Shopee, Lazada, TikTok Shop and other channels enter one order pool, are reviewed automatically and reserve stock, and the available quantity is synced back to each platform. Fulfillment: slotting, automatic replenishment, wave picking and scan-based packing checks run the floor, and every order is tracked against its cut-off. Flash Solution provides the system together with warehouse planning and on-site implementation; it was built and is used in Flash Fulfillment’s own warehouses.

Who it is for
Brands, sellers and in-house e-commerce warehouses selling on Shopee, Lazada, TikTok Shop and other platforms
Integrations
Shopee, Lazada, TikTok Shop, Amaze, Makro, Line Shop, Shopify
Order capture
One order pool for every marketplace, automatic order review, stock reservation, available stock synced back to each platform; available, reserved, damaged and safety stock kept apart
Fulfillment
Dynamic ABC slotting, automatic replenishment, PDA-guided wave picking, scan-based packing checks, SLA dashboard against each cut-off
Go-live
Usually 4–8 weeks
Where
Thailand, Singapore, Malaysia, Indonesia, Philippines, Vietnam
Operating base
Built in Flash Fulfillment’s own warehouses: 150,000+ m², serving 4,200+ brands
Pricing
Based on warehouse size and order volume, quoted after a requirements discussion

Sound familiar?

E-commerce warehouses rarely lack effort. They lack rules a system can enforce

More orders, more warehouse confusion

Orders from every platform arrive at once. The team juggles backends, Excel and chat — priorities and cut-offs blur.

Result: orders slip past the cut-off, and nobody notices until it is too late.

Inventory is not trusted

Platform stock doesn't match physical stock: overselling, stockouts, endless recounts.

Result: oversold orders get cancelled and the platform penalises the shop.

Peak campaigns expose every weak process

Late shipments, wrong picks and complaints hit together. More people won't fix it — process and system must change together.

Result: the backlog runs for days after the campaign and bad reviews pile up.

How orders flow

From order to dispatch: orders → waves → picking lists

Order flow: orders in, one order pool, batch into waves, picking list, pack check and dispatchStep 1: orders arrive from Shopee, Lazada, TikTok Shop, Amaze, Makro, Line Shop, Shopify and the brand website. Step 2: one order pool reviews orders automatically, sorts them by cut-off time and reserves stock. Step 3: orders are batched into waves: same-SKU bestsellers are picked in bulk, multi-item orders are handled separately, orders near cut-off are picked first. Step 4: the picking list is sorted by location so the PDA guides one pass. Step 5: packing verification scans order and SKU, stops wrong items and tracks orders on the SLA board. 01 Orders in Shopee · Lazada TikTok Shop · Amaze Makro · Line Shop Shopify · Website 02 One order pool Auto review Sorted by cut-off Stock reserved 03 Batch into waves Bestseller · bulk pick Multi-item · separate Near cut-off · first 04 Picking list Sorted by location PDA-guided route One pass A-03 → B-08 → C-05 05 Pack check · dispatch Scan order and SKU Stop wrong items Track on SLA board
  1. 01Orders inShopee, Lazada, TikTok Shop, Amaze, Makro, Line Shop, Shopify, Website
  2. 02One order poolAuto review, Sorted by cut-off, Stock reserved
  3. 03Batch into wavesBestseller: bulk pick, Multi-item: separate, Near cut-off: first
  4. 04Picking listSorted by location, PDA-guided route, One pass
  5. 05Pack check · dispatchScan order and SKU, Stop wrong items, Track on SLA board
Same-item orders are batched automatically — bestsellers picked in bulk, waves and picking lists in one click. Peak days stay under control.

Slotting

Locations follow sales: dynamic ABC, target locations assigned automatically

Bestsellers change every month. The system recalculates from real outbound data and tells the team what to move and where, so the fastest movers always sit on the shortest walk.

Swipe to see the full diagram

Slotting: analyse sales by SKU, classify A/B/C automatically, plan target locations by distance to packing, generate move tasks, recalculate on a scheduleFour steps. 1 Sales analysis: pick lines per SKU over the last 30 days, with trends. 2 Automatic ABC: SKUs ranked by cumulative picks and classified A, B or C (example thresholds 80%, 15%, 5%). 3 Target locations: A items nearest packing, B in the middle, C far or high. 4 Move tasks: only SKUs whose class changed get a task from current to target location, done off-peak and confirmed by PDA scan. The cycle is recalculated on a schedule, for example weekly, and before each campaign. 1Sales analysisPick lines per SKU, last 30 days SKULinesTrend 2087412 1042388 4471205 115696 331021 Period can be set 2Auto ABCRanked by cumulative picks A B C Example: A 80% · B 15% · C 5% 3Target locationsCloser to packing = faster movers CFar / high BMiddle ANear packing Packing / dispatch SKU 2087 → A-02-03 4Move tasksOnly SKUs whose class changed SKU 2087C → A C-12-04 → A-02-03 SKU 1156A → B A-01-02 → B-05-01 SKU 3310B → C B-07-03 → C-14-02 Off-peak, PDA scan to confirm Recalculated on a schedule (e.g. weekly), plus one run before each campaign
Illustration: SKU numbers, quantities, thresholds and location codes are examples. Classification rules and the recalculation cycle are configured per warehouse.

What it is based on

Pick lines and units per SKU over a period you set, such as the last 30 days. New launches and campaign items can be given a class by hand.

Where it goes

A items go nearest to packing at waist-to-shoulder height, B in the middle, C at the far end or on high levels. Location capacity and item size are checked before a location is assigned.

How it is carried out

Only SKUs whose class changed get a move task, from current location to target. Tasks run off-peak and each move is confirmed by PDA scan.

Replenishment

Pick faces never run dry: tasks created from safety stock and order demand

Stock moves from reserve storage to the pick area before pickers reach an empty location, not after. Nobody has to walk the aisles checking shelves.

Swipe to see the full diagram

Replenishment: pick-face stock is checked against safety stock and open order demand; when either trigger fires the system creates a task from reserve storage to the pick faceExample pick face A-03-01 for SKU 1042: maximum 120, safety stock 30, on hand 24, open order demand 40. Trigger 1: on hand is at or below safety stock, so refill to maximum. Trigger 2: order demand exceeds on hand, so refill before the wave is released. The system creates task RP-0318 with wave priority: move 96 units (4 cases of 24) from reserve location R2-05-02 to pick face A-03-01, first in first out, with scans at pick-down and put-away. 1Pick face A-03-01SKU 1042, checked continuously Max 120 Safety stock 30 On hand 24 To pick 40 2Two triggersEither one creates a task On hand ≤ safety stock 24 ≤ 30 Refill to max Order demand > on hand 40 > 24 Refill before the wave is released Wave-blocking tasks go first 3Replenishment taskSent to the replenisher’s PDA RP-0318 Priority: wave W-12 SKU 1042 From Reserve R2-05-02 To Pick face A-03-01 Qty 120 − 24 = 96 Batch First in, first out (4 cases × 24) Pick down → scan → put to pick face → scan
Illustration: quantities, case size, task and location codes are examples. Safety stock and maximum are set per pick face.

When to refill

When pick-face stock falls to safety stock, or when open orders need more than the pick face holds. The second check runs before each wave is released.

How much

Up to the location maximum, rounded to full cases and never above location capacity. Reserve stock is released by batch, first in first out.

Which first

Tasks that block a wave go to the top. The PDA guides the replenisher, with a scan at pick-down and at put-away so stock is accurate in both places.

Warehouse layout

More than software: locations, flow and equipment planned together

Swipe to see the full layout

Illustrative e-commerce warehouse layout: receiving, reserve storage, picking area with ABC zones, conveyor, packing stations and carrier handover lanesIllustrative layout. Inbound flows from the dock through receiving and quality check to reserve storage (putaway), then down to the A zone of the picking area (replenishment). The picking area is split into A, B and C zones, with A nearest packing. Pickers follow an S-shaped route through the aisles to a conveyor that links packing stations P1 to P8, then a weighing point, then carrier handover lanes for J&T, LEX, SPX, Flash and DHL. Returns, packing materials and exception handling have their own zones. Receiving Unload · QC · putaway QC table Returns Inspect · restock Inspection Reserve storage Full cases and pallets R1 R2 R3 Main aisle Picking area ABC zones: fast movers nearest packing C B A Packing materials Exceptions Packing Scan check, then pack P1 P5 P2 P6 P3 P7 P4 P8 Conveyor runs past every packing station Weigh Handover Lanes by carrier J&T LEX SPX Flash DHL Putaway Replenish Racks and shelves Conveyor Packing station Picking flow Replenishment flow
Illustration of an e-commerce warehouse layout. Quantities and sizes are examples; each layout is designed from your site, SKUs and order volume.

Rollout path

Three stages: control the basics, then speed, then scale

  1. Stage 1 Go-live in about 4–8 weeks

    Control the basics

    Plan locations first: after receiving, the PDA directs each putaway to its target location, and every pick and pack is scan-checked. This fixes lost items, wrong picks and stock gaps first.

  2. Stage 2 After go-live, as volume grows

    Improve operating efficiency

    Dynamic ABC slotting, automatic replenishment, wave picking and route optimization.

  3. Stage 3 When the ROI is clear

    Scale with automation

    Add automation where the ROI is clear; run campaign days from the SLA dashboard.

Want your warehouse to run on these rules?

Tell us your daily orders, platforms and the problem that hurts most. We contact you within 1 business day to set up a consultation.

Products & services

The product and service behind an e-commerce warehouse

Standard product

Flash OMS/WMS

Orders, warehouse, PDA floor work and dashboards in one system. Integrated with Shopee, Lazada, TikTok Shop, Amaze, Makro, Line Shop and Shopify; live in 4–8 weeks.

Service

Warehouse planning and implementation

Locations, travel paths, equipment and SOPs designed together, with go-live support for the frontline team.

Book a warehouse assessment

FAQ

Frequently asked questions

What is an e-commerce WMS, and when does a warehouse need one?

An e-commerce WMS (warehouse management system) controls receiving, putaway, picking, packing and dispatch with system rules and barcode scans instead of memory. Warehouses usually need one when stock records stop matching the shelves, picking slows down, or campaign orders start missing cutoff times.

How are Flash Solution, Flash OMS/WMS and Flash Fulfillment related?

Flash Solution provides consulting, systems and implementation; Flash OMS/WMS is its standard system product. The system comes from the warehouses of Flash Fulfillment, an e-commerce fulfillment provider in Southeast Asia with 150,000+ m² of its own warehouses serving 4,200+ brands. Choose Flash OMS/WMS to run your own warehouse, or the Southeast Asia fulfillment service to outsource it.

Does Flash OMS/WMS work with Shopee, Lazada and TikTok Shop?

Yes. Flash OMS/WMS is already integrated with Shopee, Lazada and TikTok Shop, as well as Amaze, Makro, Line Shop and Shopify. Orders, product data and sellable inventory are synchronized, and orders are reviewed automatically before they are released to the warehouse.

How do you prevent overselling when the same stock sells on several platforms?

Flash OMS/WMS separates physical stock into available, reserved, damaged and safety stock, and only available stock is synchronized to the platforms. When an order enters the order pool, its stock is reserved and the updated available quantity is synchronized to each platform.

How does the system improve inventory accuracy?

Every item gets a planned location. The system guides putaway to that location and verifies it by scan, corrects count variances and traces discrepancies, so records stay matched to physical stock.

What is dynamic ABC slotting?

The system classifies every SKU as A, B or C by its pick lines and units over a period you set. A items go to the locations nearest packing and easiest to reach, C items to the far end or high levels. It recalculates on a schedule, for example weekly, and creates move tasks only for SKUs whose class changed.

What triggers automatic replenishment of pick faces?

A replenishment task is created in two cases: pick-face stock falls to safety stock, or open orders need more than the pick face holds (checked before each wave is released). The task refills up to the location maximum in full cases, taking reserve stock first in, first out.

What is wave picking?

Wave picking groups a batch of orders into picking lists: same-SKU bestsellers are picked in bulk, multi-item orders are handled separately, and orders near the cut-off are picked first. Each list is sorted by location so the PDA guides pickers through the aisles in one pass.

How do you keep campaign and live-selling orders on time?

Dynamic ABC slotting keeps fast movers in the locations nearest packing, pick faces are refilled before each wave, the system batches orders into picking tasks, and SLA alerts flag orders at risk before the cut-off.

How long does it take to go live, and how is it priced?

Usually 4–8 weeks, depending on warehouse size, SKU count and the platforms to connect. Pricing depends on warehouse size and order volume; we quote after a requirements discussion.

Can we talk through our needs before deciding?

Yes. Tell us your order volume and main problems in the form. We contact you within 1 business day to talk through your requirements and give practical recommendations for your warehouse.

Book a consultation

Leave your contact and we will set up a consultation within 1 business day

Tell us your daily orders, platforms and the problem that hurts most.

Want to talk first?

We start with an online call and visit your warehouse when needed.

Main challenge * (select all that apply)
Submitted. We will contact you within 1 business day.
Book a consultationLINE
Book a consultationLINE